Feature
Device Event Engine
Panic buttons, blue lights, a tail lift and a fridge unit are wired to the box in the vehicle, but nothing listens to them until you say what each input means and what should happen when it changes.

What it does
Alert the office when the panic button is pressed, raise an alarm when the fridge unit cuts out, or show on the map when the blue lights go on.
Label every input and output as what it is on your vehicle, not 'digital input 3'.
Roll one standard setup across a fleet from a template, and see which vehicles have drifted from it.
Replay a rule against the last 24 hours of real driving before you switch it on.
A working day
A fridge unit drops out on the M6
The refrigeration input is labelled 'Fridge unit'. Your rule says that when it drops, and stays down for two minutes, the transport office is told. The two-minute qualifier stops a brief flicker setting off the alarm.
The office gets the alert with the vehicle's position on the map and rings the driver. Before the rule went live, a dry-run showed when it would have fired over the previous day, so the first real alert held no surprises.
How it works
- Label each input and output: panic button, blue lights, PTO, refrigeration, door, tail lift, immobiliser or your own name. Ignition is always set. The rest is yours.
- Build a rule in four parts: When (an input changes, a speed threshold, a geofence, ignition or a schedule), Only if (optional conditions), Then (notify people, pulse an output, record an event, call a webhook) and Who to tell.
- Debounce, a qualifying time and a cooldown between repeats cut false alarms.
- Save the setup as a template, filter it to a device model and push it to many vehicles. Per-vehicle tweaks are kept, and anything that differs from the template is flagged as drift.
- Dry-run replays a rule against the last 24 hours. Outputs can then be controlled remotely with an audit trail, and the immobiliser only when the vehicle is stopped.
If-this-then-thatName your I/OFleet templatesDry-runRemote outputs
Who it suits
Operators with kit wired in that goes beyond GPS: emergency vehicles, refrigerated trucks, plant and vans with tail lifts. The wiring is done once at fitting. After that the rules are yours to change from a desk.
Live now
The event engine is part of the Track plan, which is the plan available today. It needs a compatible unit fitted to the vehicle, with the input wired in.
Worth asking in a demo
- Which inputs your vehicle types expose
- How remote outputs and immobiliser control are permitted and logged
- Which device models have templates ready
Related features
- Fleet Tracking - Events from a rule appear on the live map.
- Power Management - Intellitec power modules for conversions that carry a lot of electrical kit.
- Automation Engine - Shown in a demo: rules for business events such as arrivals and expiries, where this page covers vehicle inputs.