← All features

Feature

Speed Control

A TrackSpeed controller is fitted to the vehicle and talks to AutoM8 through the telematics link. You set the limit, change it later and check what every vehicle is running, and updates travel over the air.

What it does

Set a vehicle's limit, and move it later, without booking the vehicle into a depot.

Apply one speed policy across the fleet and see what each vehicle is actually set to.

Push a change over the air so that it takes effect on the vehicle, not on a job sheet.

Drop the limit automatically inside a yard, depot or customer site with zonal speed.

A working day

A customer site asks for 10mph inside the gates

You draw a zone over the yard and set the lower limit for it. Any vehicle with a controller slows as it enters and returns to its normal limit when it leaves. Nobody books an appointment and the vehicle stays in service.

When an insurer or a customer audit asks what the fleet is set to, the active limit for each vehicle is on screen and every change is logged with a time. Only the people you allow can change a limit.

How it works

  1. A speed controller (TrackSpeed) is fitted to the vehicle and connects to AutoM8 over the telematics link, so there is no separate limiter system to log into.
  2. You set the limit for a vehicle or a group in AutoM8 and push it remotely, over the air rather than in person.
  3. The active limit, and the vehicle's speed against it, show alongside the same journeys, driver scores and jobs as the rest of the fleet.
  4. Lower limits for specific zones, such as a depot, yard or customer site, slow the vehicle automatically when it enters them.

Speed limiterRemote programmingOver-the-air updatesFleet speed policy

How it fits

What it controls

  • A vehicle speed limiter fitted and supported by the group (TrackSpeed)
  • Works with the telematics already on the vehicle
  • Compatible across common limiter device types

How you manage it

  • Set the limit per vehicle or per group
  • Push updates remotely, over the air
  • Config templates so a new vehicle inherits the right policy
  • Control over who is allowed to change a limit

What you can see

  • The active limit on each vehicle
  • Speed against the limit on the same journeys as your tracking
  • Changes logged, so there is a record of what was set and when

Who it suits

Fleets with a speed policy to enforce, and operators whose customers or insurers ask them to prove it. It suits mixed fleets where only some vehicles carry limiters, because the active limit shows per vehicle.

Live now - needs fitting

Speed control is part of the Track plan, which is the plan available today. It needs the speed controller fitted to the vehicle, and the group fits and supports it.

Worth asking in a demo

  • Which limiter device types are compatible with your vehicles
  • How zones are drawn and which vehicles they apply to
  • Who in your team should be allowed to change a limit

Related features

Next feature

Power Management →

Book a demo →