Installer guide
AutoM8 installer guide
Step-by-step help for authorised installers: how to set up, wire, commission and verify an AutoM8 unit on a vehicle. Pick a topic below or use the menu on the left.
This is the field-install guide, kept separate from the customer user guide. It is written for the person fitting and commissioning the hardware.
Getting started
The core install
Unlocking a unit
Authorise a new AutoM8 unit for install using its IMEI and PIN, by typing them in or scanning.
Read →Choosing the customer and vehicle
Assign the unlocked unit to the right customer and vehicle.
Read →Wiring and powering up
Wire an AutoM8 tracker to the vehicle, tell the app what each input and output is connected to.
Read →Testing inputs and outputs
Confirm each wired input reads correctly.
Read →Verifying and completing
Power up the unit, check voltage.
Read →By unit type
Two-wire and plug-in trackers
Fitting a simple two-wire tracker (power and ground only).
Read →Cameras and MDVR
Installing a camera or MDVR unit.
Read →Tachograph units
Installing a tachograph-capable unit.
Read →Asset and beacon trackers
Fitting a self-powered asset or beacon tracker.
Read →Speed limiters
Fitting a speed limiter.
Read →