Getting started
Before you start
What an authorised installer needs on hand before fitting an AutoM8 unit - the AutoM8 app, the unit's IMEI and PIN, the vehicle and an active licence.
This guide is for the authorised installer fitting and commissioning an AutoM8 unit on a vehicle. Work through it in order for each install. Have everything below ready before you go to the vehicle, so you are not held up on site.
Safety first. Follow the vehicle manufacturer’s guidance and your own safe-working procedures. Never work on live wiring with the ignition on where it can be avoided, and never test an immobiliser output on a vehicle that is not safely stationary. The app will not let you immobilise a moving vehicle, but you are still responsible for working safely.
What you need
- The AutoM8 app, signed in with your installer account (the same app staff and drivers use - you reach the installer login via Installer sign-in on the sign-in screen). This is how you unlock, commission and verify the unit; day-to-day installs are done from the app, not the office web app.
- The unit you are fitting - a tracker, camera, tachograph unit or speed limiter - with its IMEI and PIN to hand. The IMEI is printed on the unit; the PIN is issued with it.
- The vehicle, and the record it should be assigned to on the account. If you are not sure which vehicle record to use, check with the office before you finish.
- An active licence on the account for the unit. A unit only goes live once it is fitted, assigned to a vehicle and covered by an active licence. Licensing is the office user’s job, not yours, but it is worth confirming it is in place so the unit reports straight away.
- Your tools and fittings for the type of unit and how it is being fitted (plugged in or hardwired).
How an install works, end to end
Every install follows the same shape, whatever the unit:
- Sign in to the AutoM8 app.
- Unlock the unit with its IMEI and PIN.
- Fit and wire the unit to the vehicle (plug-in or hardwired, depending on the unit).
- Assign the unit to the correct vehicle.
- Verify it is working - reporting, a GPS fix, sensible supply voltage and ignition detected.
- Complete the install so the unit goes active.
The pages that follow take each of these in turn, then cover the differences for each unit type, offline installs, and what to do when something does not check out.
Troubleshooting
Why can’t I sign in? Your installer account may not be set up or may be inactive. Check your details with the office, and make sure you are using the installer sign-in, not a customer login.
Why don’t I have a PIN for the unit? The PIN is issued with the unit. If it is missing, contact the office before you fit it - you will not be able to unlock and commission the unit without it.
Related
- AutoM8 customer user guide - for the office user who manages the vehicle and its licence.