← Installer guide

The core install

Choosing the customer and vehicle

Assign the unlocked unit to the right customer and vehicle - search an existing vehicle or create a new record - so it commissions against the correct account.

Once a unit is unlocked, the wizard walks you through choosing the customer (for a stock unit) and then the vehicle. Getting these right is what ties the unit to the correct account, so take care to pick the right records before you move on to fitting.

Choose the customer

For a stock unit, the wizard opens on the Choose the customer step.

  1. Use Search customers to find the customer the unit is being fitted for.
  2. Select that customer.

If the unit is already registered to a customer, this step is locked and shows This device is registered to a customer. A device can only be moved between customers by an administrator. You cannot change the customer in the field - the customer is already set, so carry on to the vehicle.

Choose the vehicle

Next is the Select the vehicle step. Only vehicles that do not already have a device fitted are shown here.

  1. Use Search by registration to find the vehicle.
  2. Select the vehicle. This provisions and assigns the unit to it and moves you into the fitting steps.

If the vehicle is not in the list yet, create it:

  1. Tap Create a new vehicle.
  2. Fill in the registration, make, model, year, type, fuel and colour.
  3. Tap Create & assign. This provisions and assigns the unit to the new vehicle and moves you into the fitting steps.

Troubleshooting

Why can’t I see the vehicle? The Select the vehicle step only lists vehicles that do not already have a device fitted, so a vehicle that already has a unit will not appear. It may also belong to another account. If the vehicle genuinely has no device and is on this customer’s account but still is not listed, use Create a new vehicle to add it.

Why is the customer locked? The unit is already registered to a customer, so the customer step shows This device is registered to a customer. A device can only be moved between customers by an administrator. A device can only be moved between customers by an administrator, not in the field - so leave it as set and continue.