← Installer guide

Working offline

Installing offline and resuming

How the AutoM8 app saves your progress with no signal, syncs it later, and lets you resume or abandon an install.

The AutoM8 app is built to work with no signal, so you can carry on fitting a unit in an underground car park, a steel workshop or anywhere the connection drops. As you work, everything you do is saved on the device and sent to the office automatically once you are back online. A few live actions still need a connection, and this page explains which, plus how to resume a job you started earlier.

How your progress is saved

You do not have to do anything to save your work. As you go, every step, the vehicle, your notes and the checklist are saved on the device and queued to sync when you are back online. The queue is an outbox that sends your changes in order, safely, without duplicating them, so nothing is lost and nothing is sent twice.

A banner under the steps tells you the current state:

  • Offline. Progress is saved on this device (N queued)… - you have no connection. Keep working; your changes are held on the device and will send when you reconnect.
  • Syncing N changes… - you are back online and the outbox is sending your saved changes to the office.
  • Unlock session expired… re-unlock to finish syncing N items - your unlock session has lapsed and some items are still waiting to send. Re-unlock the unit to let them finish syncing.

What still needs a live connection

Most of the install works offline, but some actions talk to the unit or the server in real time and cannot be queued for later. Do these where you have signal:

  • Unlocking a unit.
  • The live input and output tests.
  • Checking verification status.
  • Testing an output.

If you know part of the job needs one of these, get into signal first, do that step, then carry on offline for the rest.

The unlock session and re-unlocking

An unlock session lasts about 2 hours. If it expires part-way through a job - because the time ran out or you went offline - the app asks you to re-unlock the unit to carry on and to finish syncing anything still queued. Re-unlocking is the same as before: enter the unit’s IMEI and PIN, and you pick up where you left off.

Resume an install

You do not have to finish an install in one go. A part-finished job stays on the dashboard so you can come back to it.

  1. On the Dashboard, find the job in the In progress list.
  2. Tap the job to Resume it. The IMEI is prefilled; re-enter the PIN.
  3. The install picks up at the step you left, with the customer, vehicle, notes and checklist restored.

To drop a job you are not going to finish, use Abandon. This discards an in-progress install.

Camera photos you take offline upload when you reconnect, the same way the rest of your progress syncs. You do not need to retake them.

Troubleshooting

Why do I have to re-unlock? The unlock session lasts about 2 hours and yours has expired, or you went offline. Re-enter the unit’s IMEI and PIN to carry on and to finish syncing anything still queued.

Why is something not syncing? You may be offline, or the unlock session may have expired. Reconnect, or re-unlock the unit if it asks you to, and the outbox drains automatically - your changes send in order, without duplicating.