← Installer guide

The core install

Unlocking a unit

Authorise a new AutoM8 unit for install using its IMEI and PIN, by typing them in or scanning, before you fit it.

Before you fit a unit you authorise it for this install using its IMEI and PIN. Unlocking authorises that one unit and opens the install wizard, so do it first, at the vehicle.

The IMEI is printed on the unit. The PIN is issued with the unit and is on the work order. Have both to hand before you begin.

Unlock the unit

From the Dashboard, tap Start a new install to open the Authorise Device screen. It has two fields.

  1. Enter the Device IMEI - the 15-digit number printed on the unit. You can type it in, or tap the scan button and scan the barcode on the unit.
  2. Enter the Device PIN - the code issued with the unit, on the work order. It is at least 8 characters and is entered in capitals. You can type it in or scan it.
  3. Tap Unlock Device.

Unlocking authorises that one unit for this install and opens the install wizard.

If the unit is a stock or warehouse unit, you will choose the customer next. If the unit is already assigned to a customer, that customer is already set and the customer step is locked.

Unlock is rate-limited. If you get Too many attempts. Please wait a minute and try again., stop, wait a minute, then try once more.

Troubleshooting

Why is my PIN rejected? If you see Device not found or PIN incorrect. Check the work order and try again., re-check the IMEI and PIN against the work order - the PIN is entered in capitals. If you have been typing them, use the scan button instead so there is no mistyping. If you have tried several times and hit the rate limit, wait a minute before trying again.

Why do I get “Too many attempts”? Unlock is rate-limited to stop repeated wrong attempts. After too many tries you see Too many attempts. Please wait a minute and try again. Wait a full minute, then enter the IMEI and PIN once more, scanning them if you can.

Why can’t the unit be found? A wrong IMEI or PIN shows Device not found or PIN incorrect. Check the work order and try again. Confirm you are unlocking the right unit for this job and that the IMEI on the unit matches the work order.