By unit type
Two-wire and plug-in trackers
Fitting a simple two-wire tracker (power and ground only) - a shorter install with no wired inputs or outputs.
Some tracker models are two-wire: they have permanent power and ground only, and no wired inputs or outputs. For these units the app shortens the install automatically, so there is less to do at the vehicle than on a standard hardwired tracker.
Two-wire models include, for example, the FMT100 and the FMC880. These have permanent power and ground only - there is nothing to wire for inputs or outputs.
How the flow differs
The unlock, customer, vehicle, verify and complete steps are exactly the same as the standard install. What changes is the fitting middle of the flow:
- Unlock the unit and choose the customer and vehicle as normal.
- The app takes you straight to the Power step - power up the unit and verify it.
- Complete the install.
There are no Wiring, Inputs or Outputs steps for a two-wire unit, because the unit has no wired inputs or outputs to commission. The app leaves them out on its own - you do not skip them by hand.
Because there is only power and ground to connect, make the connections solid and correct before you move on. A weak power or ground joint is the most common cause of a two-wire unit that will not come online at the Power step.
Related
- Unlocking a unit - where the install starts.
- Choosing the customer and vehicle - how to find or create the vehicle this tracker belongs to.