By Morgan P. · 8 November 2026 · 4 min read
Cutting fuel and wasted miles across a small fleet
To cut fleet fuel costs, find where the litres actually leak and plug the biggest holes first. For most small fleets that means idling, private mileage, harsh driving and vans taking the long way round. None of it shows on a fuel receipt. It shows in the gap between miles driven and miles that earned money.
The pattern is familiar. Fuel card spend creeps up, nobody can say why, and “diesel has gone up” only explains half of it. Here is where the rest goes.
Measure first, then change a few habits
Newer, more efficient vehicles are the slow and expensive lever. The quick one is the fuel you already buy and throw away: engines running while parked, vans driving home the long way, heavy right feet.
You cannot fix what you cannot see, so start by getting miles and engine hours onto one screen. That is what vehicle tracking gives you, and every saving below starts there.
Four places fuel goes missing
Idling. A parked van with the engine running burns fuel and does no work. Even a modest daily habit across ten vans adds up over a year, and it is the easiest win because nobody is driving anywhere to cause it.
Private and out-of-hours mileage. The 30-mile weekend round trip. The quick personal errand on the way home. It is rarely malicious, but your diesel pays for it. Tracking shows trips made outside working hours, and most teams tidy this up quickly once everyone knows it is visible.
Harsh driving. Hard acceleration and heavy braking use more fuel, and the worst offenders tend to be a small handful of drivers. You do not need to nag the whole team, only to know which three vans are drinking it.
The long route. Two engineers cover the same patch and one racks up far more miles because of how they string jobs together. Over a year that is a lot of tanks going nowhere.
Idling first
Idling wins by a distance, and a tracker is all the kit it needs.
Pull last week’s idle time per vehicle. A couple of vans usually sit well above the rest. Show those drivers their own numbers, agree a sensible cutoff (engine off if you will be stopped for more than a couple of minutes, weather allowing) and check the figure the following week.
Specifics are what make it work. “Save fuel” is a poster on a wall. “Your van idled for six hours last week and the team average was two” is a conversation people act on.
Driving style
Smoother driving uses less fuel over the same route, and the gap between your best and worst driver is often wider than owners expect.
Fairness matters. A flat “over the limit is bad” score punishes the laden van climbing a hill and ignores the empty one coasting down it. AutoM8 scores against real g-force corrected for the vehicle’s weight and drivetrain, so a heavy van or an EV is judged on its merits. The detail is in how fair driver scoring works, and the driver scoring feature shows who needs a quiet word.
Go after the few who cost the most. Leave the steady ones alone.
Route changes
If engineers double back, cross town twice or take jobs out of order, tightening the run order cuts miles directly. Fewer miles means less fuel and less wear. Our piece on what route optimisation is and whether it cuts miles covers when it helps and when it does not.
Routing saves most on busy, multi-drop days and very little on a patch with one job a day, so check your job counts before chasing it.
Where to begin
Pick one number. Run an idle-time report for the last seven days, sorted worst to best, and the one or two vans carrying the problem will show within a minute. Have the conversation, agree the cutoff and open the same report next Monday.
That weekly habit pays for itself before you touch routing or scores. Once it is running, add the others and use a simple fuel and mileage report to keep score, so the savings do not creep back. A new fleet is not required, only a clear view of the miles you already pay for.
Related features