Vehicle hardware
Engine data (CAN bus)
Read live engine data - fuel, RPM, temperature and more - from a CAN-connected vehicle.
CAN bus is the internal network built into most modern vehicles; a CAN-capable tracker taps into it to read engine data directly. With a CAN-capable device wired to the vehicle, AutoM8 reads live engine data straight from the vehicle.
Hardware required. Engine data needs a CAN-capable device connected to the vehicle’s CAN bus. No plan upgrade is needed - it is available on your plan once the hardware is fitted and reporting.
Permissions. Seeing engine data needs the Vehicles View permission (in the FMS (Fleet Management) group). Administrator and Manager include it by default.
Where to find it
Open a vehicle and go to its Telemetry tab. There you get three sections: a live map of the vehicle, the CAN Gauges panel below, and a Fuel Trend chart.
What you see
The CAN Gauges panel shows live gauges for the vehicle:
- Fuel level
- RPM
- Coolant temperature
- Battery voltage
- Odometer (shown in miles)
- Engine hours
- Ignition (on or off)
The Fuel Trend chart plots fuel over time and highlights sudden drops that can point to a fuel issue or theft.
There is a Refresh button on the CAN panel to pull the latest reading on demand.
Stale data. When a vehicle has not sent CAN data recently, the panel shows a banner reading “CAN data is stale … Ignition may be off”, and the gauges dim. This is normal when the vehicle is parked and switched off - the numbers are simply the last ones received.
If a vehicle has never sent any engine data, you will see a “No CAN Data Available” message. Check that the device supports CAN and is connected to the vehicle. Whether a device is CAN-capable is shown on the device page - see Managing devices and trackers.